Co2 Laser Power Supply 130w For Laser Tube Engraving Cutting Machine Ac220v/110v
Rated 3.5/5 based on 11 customer reviews

Co2 Laser Power Supply 130w For Laser Tube Engraving Cutting Machine Ac220v/110v

Available: Out of Stock
Product SKU: KGDY130W000000001V2
£111.99
Successful pre-order.Thanks for contacting us!


Features & Details


  • [HIGH EFFICIENCY]- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.
  • [SIMPLE PORT CONTROL]- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.
  • [LASER POWER ADJUSTMENT]- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.
  • [OPEN CIRCUIT PROTECTION]- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.
  • [FACTORY AGING TEST]- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.
Product Description

Laser Power Supply

The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube.

  • High Efficiency
  • Simple Port Control:
  • Laser Power Adjustment
  • Open Circuit Protection


Key Features



High Performance


Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.



Easy Control


The laser power supply machine starts and stop can be easily controlled by the TTL level.




Simple Laser Power Control


Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.




Mark Clearly


Each data is marked for your convenience.
Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.




Protection Function


Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life.




Good Compatibility


Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes.



Specification:


  • Power: 130W
  • Input Voltage: AC110V / AC220V
  • Maximum Output Voltage: 50KV
  • Maximum Output Current: 35mA
  • Efficiency: 90%
  • Response Speed: ≤1ms
  • Cooling Method: Fan Cooling
  • Operating Temperature: -10 ~ 40℃
  • Relative Humidity: ≤90%
  • Gross Weight:3.91kg/8.62lbs
  • Package Size: 38x20x14cm/14.96x7.87x5.51inch


Package Content:

  • 1 x High Voltage Connector
  • 1 x Laser Power Supply (130W)




Features & Details


  • [HIGH EFFICIENCY]- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.
  • [SIMPLE PORT CONTROL]- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.
  • [LASER POWER ADJUSTMENT]- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.
  • [OPEN CIRCUIT PROTECTION]- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.
  • [FACTORY AGING TEST]- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.
Product Description

Laser Power Supply

The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube.

  • High Efficiency
  • Simple Port Control:
  • Laser Power Adjustment
  • Open Circuit Protection


Key Features



High Performance


Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.



Easy Control


The laser power supply machine starts and stop can be easily controlled by the TTL level.




Simple Laser Power Control


Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.




Mark Clearly


Each data is marked for your convenience.
Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.




Protection Function


Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life.




Good Compatibility


Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes.



Specification:


  • Power: 130W
  • Input Voltage: AC110V / AC220V
  • Maximum Output Voltage: 50KV
  • Maximum Output Current: 35mA
  • Efficiency: 90%
  • Response Speed: ≤1ms
  • Cooling Method: Fan Cooling
  • Operating Temperature: -10 ~ 40℃
  • Relative Humidity: ≤90%
  • Gross Weight:3.91kg/8.62lbs
  • Package Size: 38x20x14cm/14.96x7.87x5.51inch


Package Content:

  • 1 x High Voltage Connector
  • 1 x Laser Power Supply (130W)



 

Shipping Policy

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days!

Extra one-week period is needed for the customs inspection of some goods that are delivered out from European warehouses. Sorry for any trouble caused.

Shipping Times

We adopt the UPS Ground, DHL Ground, GLS only ship your orders within United Kingdom.

 UPS Ground : Shipping Time 2-6 business days.

 DHL Ground : Shipping Time 2-6 business days.

 GLS: Shipping Time 2-6 business days.

DHL Heavy Cargoes: Shipping Time 5-10 business days.

 

  • Delivery Time: 1-5 DAYS (1-5 DAYS FOR 99% OF UK)
  • Processing Time: 1 day
  • SHIP FROM Jenec & Boulevard

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. International buyers should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for address(support@vevor.co.uk).

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.co.uk.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)