Brand Semi-automatic Electric Coder Hot Stamp Ribbon Coding Printer Machine
Rated 3.5/5 based on 11 customer reviews

Brand Semi-automatic Electric Coder Hot Stamp Ribbon Coding Printer Machine

Available: Out of Stock
Product SKU: HP-241BDDSDDMJ001V2
£105.08
Successful pre-order.Thanks for contacting us!
This HP-241B hot foil coder is a table type semi-automatic machine, which can be used for printing the date of production and batch in the industries of food, beverage, medicine, etc. This machine adopts hot stamp ribbon instead of liqiud ink, thus keeping your hands and machine clean. It can print words on any soft packing materials with the features of extremely clear and never fall off.

The usage method is as follows:

1. Ribbon setup
Pull out the ribbon feed wheel with slight force, disassemble its nut, external coil and ribbon paper core; replace with new ribbon, setup external coil and nut, then install the whole wheel back to the axle, and push it inside. Reel ribbon on wheel and rollers according to structure draft. At lost use a installation, please make sure that make ribbon's ink side against roller and axle center. Furthermore, when ribbon cross between the step move wheel and press wheel, should move upward the handle to make the press wheel slightly off the step move wheel. Release the handle after ribbon cross, press wheel would automatic reset.

2. Change of hot stamp ribbon width
Change the ribbon and adjust the two-end-plate of ribbon roller, make the distance between two plates is 1mm wider than ribbon width.

3. Adjustment of connection pole
According to the thickness of printed objects, adjust length of connection pole. First release two nut of connection pole, because one thread of pole is clockwise, another id anticlockwise, so just rotate bolt to adjust length of connection pole. Correct length of pole should guarantee the type height should be 1.5-2mm lower than top of printed object, when print head is at the lowest poition.
Please note that the length of connection pole would affect print pressure.If pressure is too high, the ribbon might break or printed materials are damaged; if pressure is too low, the printed characters would be illegible. So operator should pay great attention to adjjustment of polr length.

4. Adjustment of ribbon step distance
Each time the print head reciprocate, the pull arm, swing arm of stepmove wheel and oneway move devices will make the stepmove wheel turn an angle, so drive ribbon move a distance, which is just called step distance. If step distance is too big, ribbon will be consumed fast; step distance is too small, printing characters will be illegible. The best step distance should be 1mm longer than height of characters.
To adjust step distance of ribbon, loose the butterfly-shaped nut of adjust bolt, upward move to reduce step distance, downwars move to increase step distance. After adjustment, user should tighten the butterfly-shaped nut.

5. Adjustment of temperature:aa
Clockwise rorate the knob of temperature to raise temperature, anticlockwise ratate to low down terperatutre. Perheat time of machine is 15-20 minutes.

6. Adjustment of control style and print speed
This machine can select two control ways of foot operation or automation. Turn the control switch to "foot operation", it will be controlled by foot switch. Each stamp, print once. When control switch is turned to "automation" position, it will continuously imprint between every interruption. The seed knob on control panel is used for adjustment of print speed. Turn the speed knob clockwise to accelerate speed, anticlockwide to decelerate speed.

7. Usage of CHECK and URGENT RISE button
During print procedure, if there is any urgent situation happened(type and objects jam), press URGENT RISE button, machine motor would reverse rotate to raise print head back to top position. Then you could get rid of the problems.
Usage if CHECK button: when test ribbon steps, print result and check machine, you could use foot stamp control, in order to point move machine. But normally can use CHECK button, each press, the coder will act one time.

8. Type replacement
Slightly move the handle of print head inside(1.5-2mm), meanwhile rotate handle in 90-180 degress; loose loop to take out print head. Loose the fixing bolt to replace type. Please note not to knock type, or they might be damaged.

9. Print
After above adjustment, you could start formal coding. The control way of print can be selected by operators. This machine should better be used to print to print on single sheet. Adjust the locating strip on base board according to objectes' size.

10. Cleanness
Timely clean ribbon feed and press wheel and guide pole with aether or alcohol, in order to avoid ribbon stick to them or too slide.

Application:
Can print production(year, month, day), batch code, expiry date, weight, etc; Printed material includes: plastic film, different kinds of laminated film, aluminum/plastic film, paper/plastic sheet, leather, plastic products, etc.

Features:
  • Takes use of the hot stamp printing technology instead of the ink printing
  • Can print clearly on various soft seal material
  • Special change type struture, more convinient to change the type
  • Perfect code, light weight, easy to operate, modular design, convenient maintenance and repair costs low
  • Constant temperature control
  • Operating temperature can be adjusted to fit for different seal material and color bar
  • Widely used to print product date, weight etc. in the industry of the food, the drink etc
Specifications:
  • Model: HP-241B
  • Type: Color ribbon hot printer machine
  • Condition: New
  • Coding mode: Semi-automatic
  • Power: 200W
  • Voltage: 220V
  • Printing speed: 10~100times/min, stepless speed adjustable
  • Printing area: Single line: Max. 4*35 app. 15 pcs of type; Double line: Max. 8*35 app. 30 pcs of type; Triple line: Max. 12*35 app. 45 pcs of types
  • Printing type: Arabic numbers, English letters and Chinese characters
  • Hot stamp ribbon: Standard width 1.37", length 3.93", coil diameter 1", color selectable
  • Motor reducer motor: 15W,110V; Rotation speed 140turn/min
  • Working temperature: 32~392℉
  • Machine size: 255*225*315mm (10"x10"x12.4")
  • Machine weight: 7kg (15.4lbs)
Package Content:
  • HP-241B Hot Foil Coder * 1 set
  • Tool Bag *1 pc
  • Standard Types *1 box (in tool bag)
  • Foot switch * 1 pc (in tool bag)
  • Heater Tube * 1 pc (in tool bag)
  • 3mm Hexangular Wrench * 1 pc (in tool bag)
  • 3A fuse *2 pcs
  • Small Tweezer * 1 pc (in type box)
  • Englis Manual * 1 pc
  • Hot Stamp Ribbon * 1 pc (on machine)



This HP-241B hot foil coder is a table type semi-automatic machine, which can be used for printing the date of production and batch in the industries of food, beverage, medicine, etc. This machine adopts hot stamp ribbon instead of liqiud ink, thus keeping your hands and machine clean. It can print words on any soft packing materials with the features of extremely clear and never fall off.

The usage method is as follows:

1. Ribbon setup
Pull out the ribbon feed wheel with slight force, disassemble its nut, external coil and ribbon paper core; replace with new ribbon, setup external coil and nut, then install the whole wheel back to the axle, and push it inside. Reel ribbon on wheel and rollers according to structure draft. At lost use a installation, please make sure that make ribbon's ink side against roller and axle center. Furthermore, when ribbon cross between the step move wheel and press wheel, should move upward the handle to make the press wheel slightly off the step move wheel. Release the handle after ribbon cross, press wheel would automatic reset.

2. Change of hot stamp ribbon width
Change the ribbon and adjust the two-end-plate of ribbon roller, make the distance between two plates is 1mm wider than ribbon width.

3. Adjustment of connection pole
According to the thickness of printed objects, adjust length of connection pole. First release two nut of connection pole, because one thread of pole is clockwise, another id anticlockwise, so just rotate bolt to adjust length of connection pole. Correct length of pole should guarantee the type height should be 1.5-2mm lower than top of printed object, when print head is at the lowest poition.
Please note that the length of connection pole would affect print pressure.If pressure is too high, the ribbon might break or printed materials are damaged; if pressure is too low, the printed characters would be illegible. So operator should pay great attention to adjjustment of polr length.

4. Adjustment of ribbon step distance
Each time the print head reciprocate, the pull arm, swing arm of stepmove wheel and oneway move devices will make the stepmove wheel turn an angle, so drive ribbon move a distance, which is just called step distance. If step distance is too big, ribbon will be consumed fast; step distance is too small, printing characters will be illegible. The best step distance should be 1mm longer than height of characters.
To adjust step distance of ribbon, loose the butterfly-shaped nut of adjust bolt, upward move to reduce step distance, downwars move to increase step distance. After adjustment, user should tighten the butterfly-shaped nut.

5. Adjustment of temperature:aa
Clockwise rorate the knob of temperature to raise temperature, anticlockwise ratate to low down terperatutre. Perheat time of machine is 15-20 minutes.

6. Adjustment of control style and print speed
This machine can select two control ways of foot operation or automation. Turn the control switch to "foot operation", it will be controlled by foot switch. Each stamp, print once. When control switch is turned to "automation" position, it will continuously imprint between every interruption. The seed knob on control panel is used for adjustment of print speed. Turn the speed knob clockwise to accelerate speed, anticlockwide to decelerate speed.

7. Usage of CHECK and URGENT RISE button
During print procedure, if there is any urgent situation happened(type and objects jam), press URGENT RISE button, machine motor would reverse rotate to raise print head back to top position. Then you could get rid of the problems.
Usage if CHECK button: when test ribbon steps, print result and check machine, you could use foot stamp control, in order to point move machine. But normally can use CHECK button, each press, the coder will act one time.

8. Type replacement
Slightly move the handle of print head inside(1.5-2mm), meanwhile rotate handle in 90-180 degress; loose loop to take out print head. Loose the fixing bolt to replace type. Please note not to knock type, or they might be damaged.

9. Print
After above adjustment, you could start formal coding. The control way of print can be selected by operators. This machine should better be used to print to print on single sheet. Adjust the locating strip on base board according to objectes' size.

10. Cleanness
Timely clean ribbon feed and press wheel and guide pole with aether or alcohol, in order to avoid ribbon stick to them or too slide.

Application:
Can print production(year, month, day), batch code, expiry date, weight, etc; Printed material includes: plastic film, different kinds of laminated film, aluminum/plastic film, paper/plastic sheet, leather, plastic products, etc.

Features:
  • Takes use of the hot stamp printing technology instead of the ink printing
  • Can print clearly on various soft seal material
  • Special change type struture, more convinient to change the type
  • Perfect code, light weight, easy to operate, modular design, convenient maintenance and repair costs low
  • Constant temperature control
  • Operating temperature can be adjusted to fit for different seal material and color bar
  • Widely used to print product date, weight etc. in the industry of the food, the drink etc
Specifications:
  • Model: HP-241B
  • Type: Color ribbon hot printer machine
  • Condition: New
  • Coding mode: Semi-automatic
  • Power: 200W
  • Voltage: 220V
  • Printing speed: 10~100times/min, stepless speed adjustable
  • Printing area: Single line: Max. 4*35 app. 15 pcs of type; Double line: Max. 8*35 app. 30 pcs of type; Triple line: Max. 12*35 app. 45 pcs of types
  • Printing type: Arabic numbers, English letters and Chinese characters
  • Hot stamp ribbon: Standard width 1.37", length 3.93", coil diameter 1", color selectable
  • Motor reducer motor: 15W,110V; Rotation speed 140turn/min
  • Working temperature: 32~392℉
  • Machine size: 255*225*315mm (10"x10"x12.4")
  • Machine weight: 7kg (15.4lbs)
Package Content:
  • HP-241B Hot Foil Coder * 1 set
  • Tool Bag *1 pc
  • Standard Types *1 box (in tool bag)
  • Foot switch * 1 pc (in tool bag)
  • Heater Tube * 1 pc (in tool bag)
  • 3mm Hexangular Wrench * 1 pc (in tool bag)
  • 3A fuse *2 pcs
  • Small Tweezer * 1 pc (in type box)
  • Englis Manual * 1 pc
  • Hot Stamp Ribbon * 1 pc (on machine)



 

Shipping Policy

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days!

Extra one-week period is needed for the customs inspection of some goods that are delivered out from European warehouses. Sorry for any trouble caused.

Shipping Times

We adopt the UPS Ground, DHL Ground, GLS only ship your orders within United Kingdom.

 UPS Ground : Shipping Time 2-6 business days.

 DHL Ground : Shipping Time 2-6 business days.

 GLS: Shipping Time 2-6 business days.

DHL Heavy Cargoes: Shipping Time 5-10 business days.

 

  • Delivery Time: 1-5 DAYS (1-5 DAYS FOR 99% OF UK)
  • Processing Time: 1 day
  • SHIP FROM Jenec & Boulevard

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for address(support@vevor.co.uk).

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.co.uk.

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
P
P.P.
Works fine

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
P
P.P.
Works fine