40w Co2 Laser Power Supply Dedicated Fit Co2 Laser Tube Laser Engraver Machine
Rated 3.5/5 based on 11 customer reviews

40w Co2 Laser Power Supply Dedicated Fit Co2 Laser Tube Laser Engraver Machine

Available: Out of Stock
Product SKU: 40W激光电源-V220
£67.99
Successful pre-order.Thanks for contacting us!
This high frequency CO2 laser power supply is dedicated for CO2 laser device, with high efficiency, high frequency and short response time. The compact and handy power supply has excellent compatibility with laser device and can be directly connected.With this power supply,laser device will be easily started up and well operated with higher conversion efficiency and longer expectation of life.Used with some specific laser device,peak output power of the laser would be up to 50W and average output power is 40W.
The power is adjustable through it's TTL control or by a 5K variable resistor.It support any CO2 laser for up to 40Watt.Small design with excellence PWM control circuitry.
Features:
  • High response speed and effect
  • Dramatically lengthen the service life of laser
  • Easy Control:The start and stop of laser can be easily controlled by TTL level.And there are protection switch to test the external water,ventilation,etc.
  • Easy control of laser power:Both 0-5V analog signal and PWM signal can control the laser power
  • The power supply has the function of open circuit protection:Under the condition of good protective earthing,the power supply can work in open-circuit condition for a short time,which could avoid the damage of laser power supply because of the bursting of laser tube,thereby enhancing the life of power supply
  • The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser
  • The power supply adds a new function,that is timely scene judging which part is damaged,laser tube or laser power
  • Application:acrylic sculpture,cut:fabric sculpture cut:rubber sheet sculpture,cutetc.
Specifications:
  • Maximum output voltage:DC 25KV.
  • Maximum output current: DC 20mA.
  • Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
  • Protection:with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
  • Response time (from time of input being available to the output current being up to nominal value): ≤1ms.
  • TTL voltage level control: effective voltage level can be high or low through setting.
  • Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
  • Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level)
  • Environmental requirements:temperature (-10~ 40℃), relative humidity ≤85%.
  • Input voltage:AC220V or AC110V (to be specified when placing order).
Package Content:
1×Laser Power Supply
This high frequency CO2 laser power supply is dedicated for CO2 laser device, with high efficiency, high frequency and short response time. The compact and handy power supply has excellent compatibility with laser device and can be directly connected.With this power supply,laser device will be easily started up and well operated with higher conversion efficiency and longer expectation of life.Used with some specific laser device,peak output power of the laser would be up to 50W and average output power is 40W. The power is adjustable through it's TTL control or by a 5K variable resistor.It support any CO2 laser for up to 40Watt.Small design with excellence PWM control circuitry. Features:
  • High response speed and effect
  • Dramatically lengthen the service life of laser
  • Easy Control:The start and stop of laser can be easily controlled by TTL level.And there are protection switch to test the external water,ventilation,etc.
  • Easy control of laser power:Both 0-5V analog signal and PWM signal can control the laser power
  • The power supply has the function of open circuit protection:Under the condition of good protective earthing,the power supply can work in open-circuit condition for a short time,which could avoid the damage of laser power supply because of the bursting of laser tube,thereby enhancing the life of power supply
  • The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser
  • The power supply adds a new function,that is timely scene judging which part is damaged,laser tube or laser power
  • Application:acrylic sculpture,cut:fabric sculpture cut:rubber sheet sculpture,cutetc.
Specifications:
  • Maximum output voltage:DC 25KV.
  • Maximum output current: DC 20mA.
  • Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
  • Protection:with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
  • Response time (from time of input being available to the output current being up to nominal value): ≤1ms.
  • TTL voltage level control: effective voltage level can be high or low through setting.
  • Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
  • Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level)
  • Environmental requirements:temperature (-10~ 40℃), relative humidity ≤85%.
  • Input voltage:AC220V or AC110V (to be specified when placing order).
Package Content:1×Laser Power Supply

 

Shipping Policy

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days!

Extra one-week period is needed for the customs inspection of some goods that are delivered out from European warehouses. Sorry for any trouble caused.

Shipping Times

We adopt the UPS Ground, DHL Ground, GLS only ship your orders within United Kingdom.

 UPS Ground : Shipping Time 2-6 business days.

 DHL Ground : Shipping Time 2-6 business days.

 GLS: Shipping Time 2-6 business days.

DHL Heavy Cargoes: Shipping Time 5-10 business days.

 

  • Delivery Time: 1-5 DAYS (1-5 DAYS FOR 99% OF UK)
  • Processing Time: 1 day
  • SHIP FROM Jenec & Boulevard

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. International buyers should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for address(support@vevor.co.uk).

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.co.uk.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)