Hc-700g Vacuum Suction Machine Hopper Split Type Suction Machine Hopper
Rated 3.5/5 based on 11 customer reviews

Hc-700g Vacuum Suction Machine Hopper Split Type Suction Machine Hopper

Available: Out of Stock
Product SKU: 700GZKSLJLD000001V0
£72.99
Successful pre-order.Thanks for contacting us!
It conveys plastic granules to the injection mould machine with ease. It is easy to operate and its filter system makes it possible to be used for a long time. An independent filter device facilitates dust removal and noise reducing installations for silent operations. The machines are available in conveying capacity ranges of 310Kg/hr. Vacuum Auto-Loader, has found a large number of users swear by the qualitative parameters of this product.

The vacuum feeding machine is applicable for conveying raw materials and granulated materials for avoiding pollution. It is featured by microcomputer control, simple operation and easy repair, and may automatically alarm when there isn't material. Stainless steel material chamber door for protecting the materials from pollution, independent filtering device. It is convenient for removing dust, adopt double pole switch to control the feeding action (optional), motor protective device, filter observing window. Two-material proportional valve is optional for mixing new material with granulated material or immediately recycling granulated material.

Installation:
Start the machine, press SET to set sucking materials time, keep on press INC and DEC to increase and decrease the time within 3s. The manufacturer-set time is 15 seconds.
Presss RUN to start sucking, press again will stip sucking; The machine will stop working and sound alarm with three times no materials sucking; The machine will automatic sucking materials once power on reset if you haven't stop the working machine beforfe power dump.
Set loading time when machine on stop condition, after that the machine will feeding automatic.

Maintenance:
Set the sucking time which should be the time length needed for the sucking to fill 90% of the storage tank.
Periodical examination and cleaning air filter device.
Clean the filter net once the sucking abating
Change the carbon brush in time, while strange sound, spark appear or current increase of motor.

Features:
  • Host and hopper separation design, safe and convenient.
  • Stainless steel vacuum hopper, to ensure that the raw material is not contaminated
  • The selection of power distribution eye hopper can be directly installed in the molding machine feeding inlet
  • Automatic motor protection devices for long service life
  • A separate filtration device system ,easy to clean and maintenance
  • Vacuum material can be directly installed on the molding machine hopper
  • The microcomputer control system, simple operation, precise control, and a number of warning indicator
  • 2 years warranty
Specifications:
  • Model: HC-700G
  • Power: 1kw/1.3hp 1Φ
  • Voltage: 220V
  • Motor typel: Carbon brush
  • Conveying capacityl: 310kg/h
  • Suction lift: 4m
  • Static air pressure(MAX): 1550mm/HZO
  • Reservoir volumel: 7.5L
  • Conveying tube inner diameterl: Φ38
  • Specification of the attached hoses: Φ38x4 2pcs
  • Size: 370*300*560mm
  • Weight: 20kg
Package Content:
  • 1 x Hopper
It conveys plastic granules to the injection mould machine with ease. It is easy to operate and its filter system makes it possible to be used for a long time. An independent filter device facilitates dust removal and noise reducing installations for silent operations. The machines are available in conveying capacity ranges of 310Kg/hr. Vacuum Auto-Loader, has found a large number of users swear by the qualitative parameters of this product.

The vacuum feeding machine is applicable for conveying raw materials and granulated materials for avoiding pollution. It is featured by microcomputer control, simple operation and easy repair, and may automatically alarm when there isn't material. Stainless steel material chamber door for protecting the materials from pollution, independent filtering device. It is convenient for removing dust, adopt double pole switch to control the feeding action (optional), motor protective device, filter observing window. Two-material proportional valve is optional for mixing new material with granulated material or immediately recycling granulated material.

Installation:
Start the machine, press SET to set sucking materials time, keep on press INC and DEC to increase and decrease the time within 3s. The manufacturer-set time is 15 seconds.
Presss RUN to start sucking, press again will stip sucking; The machine will stop working and sound alarm with three times no materials sucking; The machine will automatic sucking materials once power on reset if you haven't stop the working machine beforfe power dump.
Set loading time when machine on stop condition, after that the machine will feeding automatic.

Maintenance:
Set the sucking time which should be the time length needed for the sucking to fill 90% of the storage tank.
Periodical examination and cleaning air filter device.
Clean the filter net once the sucking abating
Change the carbon brush in time, while strange sound, spark appear or current increase of motor.

Features:
  • Host and hopper separation design, safe and convenient.
  • Stainless steel vacuum hopper, to ensure that the raw material is not contaminated
  • The selection of power distribution eye hopper can be directly installed in the molding machine feeding inlet
  • Automatic motor protection devices for long service life
  • A separate filtration device system ,easy to clean and maintenance
  • Vacuum material can be directly installed on the molding machine hopper
  • The microcomputer control system, simple operation, precise control, and a number of warning indicator
  • 2 years warranty
Specifications:
  • Model: HC-700G
  • Power: 1kw/1.3hp 1Φ
  • Voltage: 220V
  • Motor typel: Carbon brush
  • Conveying capacityl: 310kg/h
  • Suction lift: 4m
  • Static air pressure(MAX): 1550mm/HZO
  • Reservoir volumel: 7.5L
  • Conveying tube inner diameterl: Φ38
  • Specification of the attached hoses: Φ38x4 2pcs
  • Size: 370*300*560mm
  • Weight: 20kg
Package Content:
  • 1 x Hopper

 

Note: Due to the lack of operating manpower caused by the COVID-19, the maximum size of orders of the destination country of the United Kingdom will be limited: 40cm*40cm*40cm. We apologize for the inconvenience caused.

Shipping Policy

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days!

Shipping Times

We adopt the UPS Ground, DHL Ground, GLS only ship your orders within United Kingdom.

 UPS Ground : Shipping Time 2-6 business days.

 DHL Ground : Shipping Time 2-6 business days.

 GLS: Shipping Time 2-6 business days.

DHL Heavy Cargoes: Shipping Time 5-10 business days.

 

  • Delivery Time: 1-5 DAYS (1-5 DAYS FOR 99% OF UK)
  • Processing Time: 1 day
  • SHIP FROM Jenec & Boulevard

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for address(support@vevor.co.uk).

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.co.uk.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)